Revolutionary High Capacity Filter System
One Cartridge™ Series
- Large range of cartridge filters available
- Two (2) connection options; standard 1.25" or commercial 2" connection for high flow applications
- Maximum working pressure: 8.6 bar / 125 psi
- Maximum working temperature: 49° C / 120° F
The One Cartridge Tank™ series offers a cost-effective and efficient filtration solution for domestic, commercial and light industrial applications. The One Cartridge Tank™ uses a non-metallic construction making it non-corrosive and lightweight. The filter cartridges are simple to install and replace, and come in multiple configuration options, making the One Cartridge Tank™ the perfect filtration system for high flow commercial / light industrial applications to stand-alone residential point-of-entry and whole house filtration applications alike.
The One Cartridge Tank™ is a high performance filtration device and has been rated at 125 psi (8.6 bar) operating pressure with a 4:1 Burst Safety Factor. Non-metallic, lightweight, cost effective, and comes with multiple configuration options, this is the filtration system of the future.
The One Cartridge Tank™ is a superb water filtration system.
Features & Benefits
The One Cartridge™ series is ideally suited to a wide range of applications including:
- Residential
- Restaurants & food service
- Rental fleets
- Cooling towers
- Chilled water loops
- Livestock & poultry water systems
- Potable water
- Food & beverage production
- Cosmetics & personal care products
- Pharmaceutical & biomedical
- Reverse Osmosis pretreatment
- Sea water and brackish water applications
- Fine chemicals
- Electronics
- Electronics
- Metal finishing process water
- Plating solutions
- Oxidizing agents and other corrosive fluids
- Concentrated acids and alkali
- Waste water
Features & Benefits
- Simple to install
- Easy filter change out
- No tools required
- Large capacity filter configurations featuring large surface area filtration
- Nonmetallic making it non-corrosive and lightweight
- High chemical compatibility
- Extended service life, contaminant removal and dirt holding capacity
- High flow, low pressure drop
- Built-in pressure relief valve
- Available with standard 1.25" or commercial 2" plumbing connection
Filters for Standard 1¼" Plumbing Connection
Blue Filter Cartridge Series
The Blue Series cartridges incorporate carbon block filter technology that is highly effective at removing chlorine and VOCs as well as reducing bad taste and odor from potable drinking water. These nominal filters are made using high performance coconut shell carbon, which has more micropores compared to other types of carbon blocks. These high capacity Blue Series carbon blocks are capable of flowing at nearly 50 LPM (15 GPM) and treating 250,000 gallons of water, nearly 950 cubic meters.
- High performance activated carbon block
- Polypropylene outer wrap
- Polyethylene netting
- Exceptionally low pressure drop
- Provides whole house carbon filtration
- Excellent contaminant reduction
- Standard 1¼" connection
- Proprietary manufacturing process
Yellow Filter Cartridge Series
The Yellow Series cartridges are dual gradient filtration solutions with string wound external layer and meltblown polypropylene core for extended life and use, with nominal filtration levels ranging 5 and 20 microns.
- Outer string wound layer manufactured using 100% polypropylene yarn
- Precision wrapping pattern captures 20 or 50 micron particles or larger
- Dual gradient filter extends service life of inner filter core
- High dirt holding capacity
- Meltblown inner core manufactured using thermally bonded polypropylene fibers
- High purity
- Excellent chemical resistance
- Standard 1¼" connection
Orange Filter Cartridge Series
The Orange Series cartridges are gradient double pleated filtration solutions for extended life and use, with nominal filtration levels of 5, 10 and 20 microns. The filters are designed with an external pleated pre-filter layered over a finer pleated filter core, extending filtration efficiency, contaminant loading and service life, while achieving high flow and low pressure drop.
- Dual gradient, double pleated
- Filter belly bands
- Durable polyester filter and polypropylene cap construction
- Double Buna-N O-ring seals ensures no bypass of contaminants
- High chemical compatibility
- Bacteria resistant
- Resistant to filter collapse under high flow or contaminant load applications
- Low pressure drop, high flow
- Standard 1¼" connection
Green Filter Cartridge Series
The Green Series cartridges are electropositively charged dual gradient double pleated filtration solutions that successfully remove contaminants from 1 to 0.2 microns. These cartridges feature advanced technology NanoAl™ media, a nonwoven matrix of Nano alumina fibers that produce an electropositive field. This charged field acts similar to a NF polymeric membrane and is ideal for the removal of Humic Acid based tannins, 3-4 log cyst reduction, endotoxin removal as well as the removal of select heavy metals such as Fe2, Fe3, Sn, Cu, Cr3, and Al.
The NanoAl™ media has been tested and shown to be successful at removing various types of pharmaceuticals and chemicals from municipal water samples, including antibiotics such as Penicillin G and chemotherapy drugs like Flumenquine. Even endocrine disrupters such as BPA have been successfully treated and removed with NanoAl™ media. The filter is also ideal for removing emulsified oils, reducing SDI in RO prefilter applications, and even removing dyes, proteins and biologicals in waste water treatment applications.
The filter cartridges are designed with a 20 micron pleated prefilter layered over the electropositively charged internal core, improving contaminant loading properties and service life, while achieving high flow rates with low pressure drop.
- Electropositively charged NanoAl™ media
- Dual gradient double pleated filters
- Filter belly bands
- Double Buna-N O-ring seals ensures no bypass of contaminants
- Agion® antimicrobial technology provides around the clock protection from microbe growth and biofouling
- Successfully remove contaminants (1 to 0.2 microns)
- High flow rate and contaminant loading capacity
- Can be further enhanced with Powdered Activated Carbon (PAC) for treating soluble contaminants and Chlorine
- Standard 1¼" connection
White Media Cartridge Series
The White Series cartridges are unique media bottles that allow multiple types of filtration media to be used with the Cartridge Tank series. The White cartridge is a 0.5 cu. Ft (14L ) empty bottle that can be filled with most types of filtration media. The media bottle can be further divided in half using an optional Mid-Vortech® distributor plate, to create two independent 0.25 cu. Ft. (7L) filtration media chambers.
The bottle comes equipped with the patented Vortech® distributor plate and is sealed with an O-ring sealed top cap to prevent media from exiting the bottle.
- 0.5 cu. Ft. (14 L) empty media cartridge
- High quality Polypropylene bottle for repeated use
- O-ring sealed cartridge cap with mesh liner
- Equipped with Vortech® distributor plate
- Optional Mid-Vortech® distributor plate option for dual media applications
- Can be exchanged and reused in filter exchange applications
- Can be plumbed for up-flow or down-flow applications
- Standard 1¼" connection
Filters for Commercial 2" Plumbing Connection
Purple Filter Cartridge Series
The Purple Series cartridges are high-flow meltblown polypropylene filtration solutions with nominal filtration levels of 5 and 20 microns. These depth filtration cartridges are designed with a large surface area for increased loading capacity and extended service life, while achieving high flow rates of up to 100 GPM (380 LPM) with low pressure drop.
The Purple series cartridges will outperform competitive filtration solutions in all turbidity applications including silt, rust, and other soft particle filtration. The Purple Series also provides lower shear water velocity as the raw water passes through the filter, allowing for more contact time and interaction with the extensive surface area of the filters. This results in higher water quality and longer life of the overall filtration system.
- High flow rates up to 100 GPM / 380 LPM
- Low pressure drop
- Durable polypropylene filter and cap construction
- High chemical compatibility
- Double EPDM O-ring seals
- High dirt holding capacity
- Commercial 2" connection
Red Media Cartridge Series
The Red Series cartridges are high flow pleated filtration solutions for extended life and use, with nominal filtration levels of 5, 20, 50, and 150 microns, along with a 1 micron absolute option and a powdered activated carbon (PAC) pleated media solution as well. These pleated filters are designed with an exceptionally large filtration surface area for greater contaminant loading and extended service life, all while achieving high flow rates of up to 150 GPM (568 LPM) with low pressure drop.
The Red Series filters will outperform competitive filtration solutions in all turbidity applications including silt, rust, and other particle filtration. The Red Series also provides lower shear water velocity as the raw water passes through the filter, allowing for more contact time and interaction with the extensive surface area of the filters. This results in higher water quality and longer life of the overall filtration system.
- High flow rates up to 150 GPM / 568 LPM
- Low pressure drop
- Multiple micron rating filter options
- Durable Polypropylene filter and cap construction
- Filter belly bands
- Unique filter handle design
- Ideal replacement for bag filters
- 5 microns can be cleaned and reused up to a certain point
- Commercial 2" connection
Product Certifications
CE
Europe
ACS
France
Downloads
Products
[product_table filters=”false” columns=”name,description” links=”none” search_box=”false” reset_button=”false” totals=”false” page_length=”false” term=”series:Cartridge Tank 1.25″]
