Environmentally-Friendly polypropylene sediment filters
Grooved Polypropylene Sediment Filters
- Available in 1, 5, 10 and 20 micron nominal ratings
- Available in 10” and 20” standard and jumbo sizes
Our premium quality sediment filters are perfect for:
- Removal of sediment, dirt, pipe scale and other suspended particles
- Reverse osmosis prefilters
- Standalone water filter systems
- Point-of-entry or point-of-use filtration
As part of our commitment to sustainability, GWS is proud to present the next generation of sediment removal technology – the Grooved PP Sediment Filter.Made in-house with our state-of-the-art, proprietary manufacturing process, the Grooved PP Sediment Filter features a dual-gradient structure with up to 80% more surface area, resulting in a three-fold increase in sediment-removing capacity. Use in combination with GWS filter housings.
Features & Benefits
- 100% pure, chemical-free virgin polypropylene
- Specially designed to remove rust, dirt, particles and impurities as small as 1 micron
- 3X longer filter life for reduced waste and lower environmental impact
- Available in full range of sizes and micron ratings
- Fully recyclable
- Prefilter for domestic or commercial water filter systems and reverse osmosis.
- Standalone point-of-entry or point-of-use sediment filtration
- Up to 80% more surface area compared to standard sediment filter.
- Increased dirt holding capacity
- NSF/ANSI 42 approved
Models
| Model Number | Dimensions | Nominal Rating | Initial ΔP at Flow Rate | ||
|---|---|---|---|---|---|
| Standard 2.5" Filters | |||||
| PP1001-G | 64mm x 251mm (2.5” x 9.875”) | 1 micron | 0.04 bar at 19 l/min (0.6 psi at 5 gpm) | ||
| PP1005-G | 64mm x 251mm (2.5” x 9.875”) | 5 micron | 0.03 bar at 19 l/min (0.4 psi at 5 gpm) | ||
| PP1010-G | 64mm x 251mm (2.5” x 9.875”) | 10 micron | 0.01 bar at 19 l/min (0.2 psi at 5 gpm) | ||
| PP1020-G | 64mm x 251mm (2.5” x 9.875”) | 20 micron | 0.01 bar at 19 l/min (0.2 psi at 5 gpm) | ||
| PP2001-G | 64mm x 508mm (2.5” x 20”) | 1 micron | 0.04 bar at 38 l/min (0.6 psi at 10 gpm) | ||
| PP2005-G | 64mm x 508mm (2.5” x 20”) | 5 micron | 0.03 bar at 38 l/min (0.4 psi at 10 gpm) | ||
| PP2010-G | 64mm x 508mm (2.5” x 20”) | 10 micron | 0.02 bar at 38 l/min (0.3 psi at 10 gpm) | ||
| PP2020-G | 64mm x 508mm (2.5” x 20”) | 20 micron | 0.02 bar at 38 l/min (0.3 psi at 10 gpm) | ||
| Jumbo 4.5" Filters | |||||
| PP1001BB-G | 114mm x 251mm (4.5” x 9.875”) | 1 micron | 0.07 bar at 38 l/min (1 psi at 10 gpm) | ||
| PP1005BB-G | 114mm x 251mm (4.5” x 9.875”) | 5 micron | 0.07 bar at 38 l/min (1 psi at 10 gpm) | ||
| PP1010BB-G | 114mm x 251mm (4.5” x 9.875”) | 10 micron | 0.07 bar at 38 l/min (1 psi at 10 gpm) | ||
| PP2001BB-G | 114mm x 508mm (4.5” x 20”) | 1 micron | 0.07 bar at 75 l/min (1 psi at 20 gpm) | ||
| PP2005BB-G | 114mm x 508mm (4.5” x 20”) | 5 micron | 0.07 bar at 75 l/min (1 psi at 20 gpm) | ||
| PP2010BB-G | 114mm x 508mm (4.5” x 20”) | 10 micron | 0.07 bar at 75 l/min (1 psi at 20 gpm) | ||
Product Certifications
